14
“yes” the chase will be erased. This only works when there is no chase being edited or recorded. While
editing a chase, “erase” is used to erase the chase steps. You can abort chase erase at any time by either
pressing “no” or exiting record mode by pressing the “record” switch.
Note: It can take up to 30 seconds to overwrite or erase a chase depending on how much of the memory
is currently filled.
EDITING CHASES
To edit a chase that has already been recorded, press “record” followed by “chase”. Before making any
channel changes, press the number of the one you want to edit. The message “Edit this existing Chase?”
will appear in the display. Press “yes” and the chase will be called up and you can add to it or modify it
by selecting steps and changing any channel levels. You can also use the “erase” switch to remove the
contents of the current step or if the step is empty, remove the step entirely. You can also insert
additional empty steps at the current step by pressing “add”. You will be prompted whether or not to add
an empty chase step here. Press “yes” to insert a step at the current step number. All following chase
steps will be moved up one number. Once the new step is added you can record channel levels or presets
there.
After you have finished editing the chase you can store it at the same memory location or at a new
location by selecting the page and by pressing a number switch. You can also use this method to copy a
chase to another location by saving it without making any changes.
FACTORY CHASES
When you select chase memory page “FC” (factory chase) you can call from the list of 48 preprogrammed
pan and tilt chases. Some hard to program movements such as circles and figure eights can be found here.
Unlike chases that you program yourself, you must first select the fixtures you want to include before you
turn on the chase.
AUDIO SWITCH
The audio switch enables the audio input as a trigger for chase steps. Pressing the “audio” switch turns
on the LED. It will flash off briefly whenever an audio beat is detected at the audio input. Any chases
that are running will sync to this beat unless the speed has been locked for that chase. Read the previous
section on recording chases regarding how to lock the chase speed. Turning on “audio” automatically
turns off “beat”. The audio switch state is not stored with a scene.
BEAT SWITCH
The beat switch allows you to override the tempo or beat of a chase by tapping on the switch in time to
any music that is playing. The LED will flash in time to the beat that is tapped in. Any chases that are
running will sync to this beat unless the speed has been locked for that chase. Read the previous section
on recording chases regarding how to lock the chase speed. Pressing the “beat” switch will automatically
turn off “audio”. To turn off the beat, press and hold the “beat” switch for one second. The “beat”
switch state and beat tempo are not stored when recording a scene.
SHOWS
(9 Seiten)
(66 Seiten)
(20 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern