15
A show is a sequence of scenes that are recorded and played back in order at preprogrammed times.
Show Designer 2 lets you record up to 24 pages of 48 shows for a total of 1152 shows.
RECORDING SHOWS
Before recording a Show you must first record the scenes that will be included in the show. Consult the
previous sections on how to do this.
To start recording a show press “record”, the “record” LED will flash. Next press “show”, the “show”
LED will also flash. The page number will display the current Show page and any locations that already
contain Shows will be lit.
The display will show the current step that is ready to be recorded along with the scene page and scene
number in that step. The word “Empty” will appear in place of the scene page and number if there is
nothing recorded at this step. The hold time for the step is displayed in minutes and seconds. The
minutes and seconds are separated by colons “:” with seconds having a decimal point allowing tenths of a
second resolution.
When you first start the record process, step 000, scene “Start” will be displayed. Step 0 is used to add a
delay to the start of the show before the first scene is called. No scene can be recorded at step 0. If you
don’t want a delay time at the start of the show, leave the hold time as 00:00.0 and move on to step 1 by
pressing the “+” switch, the “enter” switch or by incrementing data wheel #1.
To record a show step, press the “scene” switch. With the “scene” LED lit, choose a scene for this step
by selecting the page and pressing the desired scene number. Next select the hold time for this step. The
time that you select is the time that this scene will be held until the next step is called. You can select a
new time by moving the cursor to the hour, minute or second number then press the + or - switch or use
data wheel #3 to change the time.
Once a scene has been selected and the hold time set, press “enter”. The step number will automatically
advance to the next step. You can enter up to 255 steps in the show. If you press “enter” without
selecting a scene, the step number will advance leaving the step empty.
As you are recording a show you can select any step by moving the cursor under the step number and
using the + or - switch or data wheel #1 to select a new step. You can edit the scene number or hold
time for any recorded step this way. Pressing “enter” when on the last recorded step will add an
additional step to the end of the show. If you press “enter” while the step number is not at the end you
will advance to the next step number the same as if you incremented the step number using the data
wheel.
At any time while recording the show you can enter a name. Use the right cursor switch to move the
cursor on the display to the right, continuing past the “loop” status. The screen will change showing the
name. Edit the name by putting the cursor under each character then use the + or - switch or the data
wheel to change the character.
The loop status lets you to program the show to loop continuously or play once through and stop.
(9 Seiten)
(66 Seiten)
(20 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern