17
After editing, a show can be saved at the same or at a new location by pressing any number switch. The
scene LED must be turned off. You can use this method to copy a show to another memory location by
calling it for edit and then saving it without making any changes.
PREVIEW
Preview mode allows you to first see the name of a scene, preset, chase or show before being called. With
the “preview” LED lit, the display will show the page and number as well as the name of the item that is
selected. The “go” switch is then used to call the item. For example, when calling a scene, press “scene”
then select a scene number. The page, number and name will be displayed along with the message “Press
go to call this scene”. The “go” switch LED will be lit. The scene will not be called until you press the
“go” switch. If you press a “scene” LED that is already lit, the scene will turn off as in normal operation.
SCENE MASTERS
The faders can also be used to call scenes. In this mode the faders allow manual control of the
crossfading. To use the faders this way, the “masters” LED must be lit as well and the “scene” LED.
Scenes 1 through 32 of the currently selected scene page can then be called using 4 banks of 8 faders.
To start a scene, first move the fader all the way to the bottom to reset it. The corresponding scene will
be assigned to the fader after it is moved upwards. Any chases that are part of the scene will start at this
time. Channels that are set to snap at the start of a fade will also move to the scene levels right away.
Channels that are set to snap at the end of a fade will move to their scene levels when the fader reaches
the top. All channels set to crossfade will follow the movement of the fader. This allows 8 scenes to be
running at the same time provided they are controlling different channels. Starting a new scene that uses
some of the same channels as a scene that is already active will steal those channels for the new scene.
NOTE: To start a master, the “masters” LED must be lit and the “scene” LED must be lit. The scene
will be called from the current scene page that is shown in the page display. That scene will stay attached
to that fader until that fader is reset (moving it to the bottom position). The scene will stay with the fader
even if you change pages.
MIDI
Show Designer 2 allows you to use MIDI to call scenes using a MIDI sequencer so that you can
synchronize lighting to a MIDI performance. The scene page and number is encoded in a MIDI message
that is sent when the scene is selected. The “black” switch also sends a MIDI message allowing you to
record a blackout or blackout off. The MIDI channel can be set from the “menu”.
(9 Seiten)
(66 Seiten)
(20 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern