American DJ® - www.americandj.com - X-Move LED 25R Instruction Manual Page 11
American DJ® - www.americandj.com - X-Move LED 25R Instruction Manual Page 12
it will be set up, you can turn the lens to adjust the clarity. Press
MENU to exit.
TEST - This function will run a self test program. The test
program will test pan/tilt movement and colors.
1. Tap the MENU button until “TEST” is displayed, press ENTER.
2. The xture will now run a self test.
TEMP - With this function you can check the temperature
of the xture.
1. Tap the MENU button until “TEMP” is displayed, press ENTER.
2. The temperature of the xture will now be displayed. Press
MENU to exit.
FHRS - With this function you can display the running time
of the unit.
1. Tap the MENU button until “FHRS” is displayed, press
ENTER.
2. The running time of the xture will now be displayed. Press
MENU to exit.
VER - With this function you can display the version soft-
ware of the unit.
1. Tap the MENU button until “VER” is displayed, press ENTER.
2. The software version will now be displayed. Press MENU to
exit
RSET - Use this function to reset the unit.
1. Tap the MENU button until “RSET” is displayed, press ENTER.
2. The xture will now reset,
X-Move LED 25R System Menu
2. To activate the Pan inversion tap the UP or DOWN buttons
until I is displayed, press ENTER to conm. To deactivate Pan
inversion, select No and press Enter.
I TLT - Tilt Inversion
1. Tap the MENU button until “I TLT” is displayed, press ENTER.
Either NO or 1 will be displayed.
2. To activate the Tilt inversion tap the UP or DOWN buttons
until I is displayed, press ENTER to conm. To deactivate Tilt
inversion, select No and press Enter.
LED - With this function you can have the LED display
turn off after 10 seconds.
1. Tap the MENU button until “LED” is displayed, press ENTER.
2. The display will show either “ON” or “OFF”. Press the UP or
DOWN buttons to select “ON” to keep the LED display on at
all times, or “OFF” to switch to have the LED display switch o
after 10 seconds.
3. Press ENTER to conrm. To make you LED display reappear
again press any button.
DISP - This function will reverse the display 180º.
1. Tap the MENU button until “DISP” is displayed, press ENTER.
2. Press ENTER to “ip” the display. Press ENTER to “ip” it
again. Press ENTER when you have made your desired setup.
FADJ - This function will allow you to focus the lens for a
clear LED output.
1. Tap the MENU button until “FADJ” is displayed, press
ENTER. The xture will turn a dierent way each time the
ENTER button is pressed.
2. With the spot pointed at a at wall or surface, at the distance
X-Move LED 25R System Menu
(17 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern