American DJ® - www.americandj.com - X-Move LED 25R Instruction Manual Page 10American DJ® - www.americandj.com - X-Move LED 25R Instruction Manual Page 9
X-Move LED 25R System Menu
System Menu: When making adjustments you can press
ENTER to conrm your setup or you can wait 8 seconds for
automatic setup. To exit without making any adjustments
press the MENU button.
ADDR - DMX Address Setting.
1. Tap the either the MENU, UP, or DOWN buttons until “ADDR”
is displayed, press ENTER.
2. The current address will now be displayed and ashing.
Press the UP or DOWN buttons to nd your desired address.
Press ENTER to set your desired DMX address.
SHND - This will let you choose one of the four prepro-
grammed shows. See show descriptions below.
1. Tap the either the MENU button until “SHND” is displayed,
press ENTER. Either “SH 1”, “SH 2”, “SH 3” or “SH 4” will be dis-
played.
2. Tap the UP or DOWN buttons to nd you desired show and
then press ENTER to conm and exit.
SHOWS:
Show 1 - For xtures placed on the oor, the tilt movement
angle is 210°
Show 2 - For fixtures fixed to the ceiling or truss, the tilt move-
ment angle is 90°.
Show 3 - For fixtures placed on a table or stage. The beam is
projected at the audience’s direction; i.e. in front of the stage.
Pan movement angle (left to right to left) is 160°. Tilt movement
angle is 90°.
Show 4 - For fixtures fixed to the ceiling or truss. The beam is
projected at the audience’s direction; i.e. in front of the stage.
Pan movement angle (left to right to left) is 160°. Tilt movement
angle is 90°.
SLND - This will let you set unit as a master or slave in a
master/slave conguration.
1. Tap the MENU button until “SLND” is displayed, press
ENTER. Either “SL 1” or “SL 2” will be displayed.
2. Tap the UP or DOWN buttons until your desired setting is
displayed, press ENTER to conm.
NOTE: In a Master/Slave conguration you can set one xture
to Master and then set the next xture to “SL 2”, the xtures will
now have contrast movement to each other.
SOUN - Sound Active mode.
1. Tap the MENU button until “SOUN” is displayed, press
ENTER.
2. The display will show either “ON” or “OFF”. Press the UP or
DOWN buttons to select “ON” to activate sound active mode, or
“OFF” to deactivate sound active mode.
3. Press ENTER to conrm.
BLND - Blackout or Stand by mode.
1. Tap the MENU button until “BLND” is displayed, press
ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until “Yes”
is displayed, press ENTER to conm. The xture will now be in
Blackout mode. To deactivate Blackout mode, select “No” and
press Enter.
I PAN - Pan Inversion
1. Tap the MENU button until “I PAN” is displayed, press ENTER.
Either NO or 1 will be displayed.
X-Move LED 25R System Menu
(17 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern