American DJ DMX DUO Bedienerhandbuch PDF herunterladen (Seite 9)

©American DJ® - www.americandj.com - Duo Scan RG Instruction Manual Page 17

©American DJ® - www.americandj.com - Duo Scan RG Instruction Manual Page 18

Duo Scan RG DMX Traits

Duo Scan RG UC3 Control

Fixture Cleaning: Due to fog residue, smoke, and dust cleaning

the internal and external lenses should be carried out periodically to

optimize light output.

1. Use normal glass cleaner and a soft cloth to wipe down the out-

side casing.

2. Clean the external optics with glass cleaner and a soft cloth every

20 days.

3. Always be sure to dry all parts completely before plugging the

unit back in.

Cleaning frequency depends on the environment in which the fixture

operates (I.e. smoke, fog residue, dust, dew). In heavy use we recom-

mend cleaning on a monthly basis. Periodic cleaning will ensure lon-

gevity, and crisp beam output.

Duo Scan RG Cleaning

Duo Scan RG Trouble Shooting

Trouble Shooting: Listed below are a few common problems that

you may encounter, with solutions.

No laser output from the unit;

1. Be sure you have turned “ON” the unit.

2. Be sure the external fuse has not blown. The fuse is located on

the rear panel of the unit.

3. Be sure the fuse holder is completely and properly seated.

4. Be sure the unit is not in blackout mode.

Unit does not respond to sound;

1. Low frequencies (bass) should cause the unit to react to sound.

Tapping on the microphone, quiet or high pitched sounds may

not activate the unit.

Duo Scan RG Fuse Replacement

Locate and remove the unit’s power cord. Once the cord has been

removed located the fuse holder located inside the power socket.

Insert a flat-head screw driver into the power socket and gently pry

out the fuse holder. Remove the bad fuse and replace with a new one.

The fuse holder has a built-in socket for a spare fuse be sure not to

confuse the spare fuse with active fuse.

1 2 3 4 5 6 7 8 9 10

Keine Kommentare

American DJ DMX DUO Bedienerhandbuch Seite 9